Chemical-metallographic test with nitric acid on the vehicle body and chassis of steel
DOI:
https://doi.org/10.47741/17943108.193Keywords:
alteration, chemical trauma, legal identification methods, vehicles, scientific proof means, scientific testing meansAbstract
The alteration of a vehicle identification characteristics is carried out with the use of emery and sandpaper to erase the information in order to subsequently superimpose different numeric or alphanumeric codes, thus preventing the verification of its former origin or ownership and hindering its tracking. Chemical attack has been recognized as the most sensitive technique to retrieve altered serial numbers, and this article was aimed at assessing the effectiveness of nitric acid (HNO3) 3.15 M in revealing them on body and chassis surfaces with steel, low-carbon and medium carbon steel alloys respectively. Four tests were performed: (i) Bodywork: marking, and erasing with grinding machine, (ii) bodywork: marking with electric pen, and manual deletion; (iii) chassis: marking, and manual deletion, and (iv) manual marking, and erasing with grinding machine. In all tests carried out, erased markings were retrieved in a few seconds, with definition and contrast. According to the above, the use of this reactive is acknowledged as a fast and reliable technique for chemical-metallographic tests leading to the retrieval of tempered marks on steel alloys.
Downloads
References
Aversa, S., Cerolini, R., Doro, G. & Caro, P. M. (2004). Manual de química forense. Buenos Aires: Ediciones la Rocca.
Baharum, M., Kuppuswamy, R. & Rahman, A. (2008). Recovering obliterated engraved marks on aluminium surfaces by etching technique. Forensic Science International, 177 (2): 221-227.
Bong, Y. & Kuppuswamy, R. (2010). Revealing obliterated engraved marks on high strength aluminium alloy (AA7010) surfaces by etching technique. Forensic Science International, 195 (1): 86-92.
Carrión, F. & Tocornal, X. (2009). El robo de vehículos, un negocio que prende motor. Boletín Ciudad Segura, No. 32. Quito, Ecuador.
Castro M., A. L. (2008). La criminalística en la identificación de vehículos automotores. México: Porrúa.
Consejo Nacional de Estupefacientes (2009). Resolución 0009 de 24 de Junio de 2009. Consultado en: http://es.scribd.com/doc/55902833/RESOLUCION-CNE-0009-DE-2009-1
Granja, J. & Macchi, J. (1987). Capítulo I: Revenidos. En F. Cardini, A. H. Carrara, D. Centron, E. Fernández, E. Gobbi & R. d. Graells (Eds.). Tratado de criminalística. Tomo II. La química analítica en la investigación del delito (pp. 13-53). Buenos Aires: Policial.
Hernández, W., Gómez, U. & Oidor, J. (1997). Identificación de vehículos regrabados por medio del proceso de reactivación. Bogotá, Colombia.
Jin, Y. (2012). Recovering obliterated engraved vehicle identification number on vehicle frame surfaces by etching technique. Advanced Materials Research, 503: 56-60.
Katterwe, H. (2006). Restoration of serial numbers. En E. Stauffer & M. Bonfanti. Forensic investigation nof stolen-recovered and other crime-related vehicles (pp. 177-205). Amsterdam: Academic Press.
Kesharwani, L., Gupta, A. & Mishra, M. (2013). Development of new reagent for restoration of erased serial number on metal plates. Egyptian Journal of Forensic Sciences, 3: 26-34.
Kuppuswamy, R. (2011). Metallographic Etching of Aluminium and its Alloys for Restoration of Obliterated Marks in Forensic Science Practice and Investigations. En T. Kvackaj. Alluminium alloys, theory and applications (pp. 331-352). In Tech, Chapters.
Libreros, J. (2013). Análisis del hurto de vehículos y la respuesta de política pública: presentación e índice. Atmósfera Política, 1. Recuperado de: http://www.atmosferapolitica.com/2013/03/26/analisis-del-hurto-de-vehiculos-y-la-respuesta-de-politica-publica-presentacion/.
Massiah, E. (1976). A compilation of techniques and chemical formulae used in the restoration of obliterated markings. AFTE Journal, 26-62.
Naciones Unidas (1988). Convencion de las Naciones Unidas contra el tráfico ilicito de estupefacientes y sustancias psicotrópicas. Consultado en: http://www.unodc.org/pdf/convention_1988_es.pdf
Nickolls, L. (1956). The Scientific Investigation of Crime. London: Butterworth & Co.
Norza C., E., Duarte V., Y., Castillo R., L. & Torres G., G. (2013). Hurto de automotores y estrategias contra el delito: una mirada desde la academia, el victimario y la Policía. Revista Criminalidad, 55 (2): 49-78.
Osarolube, E., Owate , I. & Oforka, N. C. (2008). Corrosion behaviour of mild and high carbon steels in various acidic media. Scientific Research and Essay, 3 (6): 224-228.
Ospina T., W., Vargas P., W., Oliveros M., W., Motta G., A., Sabogal G., A., Rodríguez S., E. et ál. (2012). Revenido químico de marcas seriales en motores de aluminio con hipoclorito de sodio. En Identificacion de Automotores. Policía Nacional de Colombia, Dirección Nacional de Escuelas, Escuela de Investigación Criminal, 28-36.
Puentes, R., Kremer, E., Torres, J. & Kremer, C. (2012). Desarrollo de una pasta de revelado basada en el reactivo de Fry. Avances en Ciencias e Ingeniería, 3 (2): 115-120.
Soto, S. M. (2005). Una aproximación a los factores determinantes del hurto de automotores en Bogotá. Revista Criminalidad, 48: 361-366.
Treptow, R. S. (1978). Handbook of Methods for the Restoration of Obliterated Serial Numbers. Cleveland: NASA Contraptor Report CR-135322.
Uli, N., Kuppuswamy, R. & Amran, M. F. (2011). A survey of some metallographic etching reagents for restoration of obliterated engraved marks on aluminium-silicon alloy surfaces. Forensic Science International, 208 (1): 66-73.
Velásquez M., C. A. (2011). ¿Es sostenible la reducción del hurto de automotores mediante atraco en Bogotá? Revista Criminalidad, 53 (1): 349-372.
Wahab M. F., A., Ghani N. I., M. & Kuppuswamy, R. (2012). An investigation into the suitability of some etching reagents to restoring obliterated stamped numbers on cast iron engine blocks of cars. Forensic Science International, 223 (1): 53-63.
Yin, S. & Kuppuswamy, R. (2009). On the sensitivity of some common metallographic reagents to restoring obliterated marks on medium carbon (0.31% C) steel surfaces. Forensic Science International, 183 (1): 50-53.
Zaili, A., Kuppuswamy, R. & Harun, H. (2007). Restoration of engraved marks on steel surfaces by etching technique. Forensic Science International, 171 (1): 27-32.
Published
How to Cite
Issue
Section
License
Licencia creative commons CC BY NC ND https://creativecommons.org/licenses/by-nc-nd/2.0/
